BN6kVv3xyx.jpg
VAQLwyz2zB.jpg

Xmod FTDI JTAG Adapter

₹ 3,800.00

Xmod-USB-X is a universal USB adapter with two channels based on FTDI FT2232H USB2 HS Interface chip. In the consigned default configuration port A is JTAG and port B is a serial interface. FT2232H port A and B are connected to small on-board programmable CPLD to allow flexible application specific remappings of FT2232H functions into 8 user I/O pins of single XMOD 12 x 8 Module. Minimum PCB area on base board to support JTAG function: 5 x 10 mm (does not include mounting hole space). The user EEPROM on the TE0790-01 is programmed with a unique serial number, licensed from Digilent Inc., and is therefor compatible with Xilinx tools. This is why this product has 2 variations and 2 pricings. The TE0790-01 includes the licensing fee to Digilent, the TE0790-01L has a blank EEPROM and because of that it's less expensive. Concerning hardware both products are exactly the same. Features Xmod form-factor supported base slots: 6 x 2, 8 x 4, 10 x 6, 12 x 8, 5 x 2, 5 x 3 M3 mounting hole FT2232H - Channel B RX/TX LED's (on top, not visible from front) - mini-USB connector (more rigid then micro-USB) - 93C56 EEPROM Lattice XO2-256 CPLD - on board programmable using Lattice tools - 8 universal I/O pins - VCCIO either 3.3 V or user supplied (1.8 to 3.3V) - Red user LED (front visible) - 12 MHz clock from on-board Oscillator LDO for optional USB power Green Power-on LED (front visible) User button (front accessible) 4 position DIP switch - Choose CPLD program mode - FTDI EEPROM disable (not implemented in PCB REV 1) - Use VIO same as VCC - Use VCC from USB

Whatsapp