81Ej48G5r3.jpg
4QL17lM2E2.jpg

GigaBee XC6SLX45-2 with 2 x 128 MByte, industrial temp. range

₹ 15,500.00

Product information "GigaBee XC6SLX45-2 with 2 x 128 MByte, industrial temp. range" Trenz Electronic GigaBee XC6SLX series are industrial FPGA micromodules integrating a leading-edge Xilinx Spartan-6 LX FPGA, Gigabit ethernet transceiver (physical layer), two independent banks of 16-bit-wide 128 MBytes DDR3 SDRAM (optional 2 x 512 MByte DDR3 SDRAM in 2 banks), 16 MBytes SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via robust board-to-board (B2B) connectors. All this on a tiny footprint, smaller than a credit card, at the most competitive price. Free and open reference designs are available for download. All parts are at least industrial temperature range of -40°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options. Sample Applications Cryptographic hardware module Digital signal processing Embedded educational platform Embedded industrial OEM platform Embedded system design Emulation platforms FPGA graphics Image processing IP (intellectual property) cores Low-power design Parallel processing Rapid prototyping Reconfigurable computing System-on-Chip (SoC) development Key Features Xilinx Spartan-6 LX FPGA, depending on model: LX45, LX100 or LX150 FPGA Design Security Solution 10/100/1000 tri-speed GBit Ethernet transceiver (PHY) 2 independent 16-bit-wide 1 GBit (128 MByte) DDR3 SDRAM (optional: 2 independent 4 GBit (512 MByte) DDR3 SDRAM in 2 banks) 128 MBit (16 MByte) SPI Flash memory (for configuration and operation) JTAG port (SPI indirect) FPGA configuration through: - B2B connector - JTAG port - SPI Flash memory Plug-on module with 2 × 100-pin high-speed hermaphroditic strips Up to 52 differential, up to 109 single-ended (+ 1 dual-purpose) FPGA I/O pins available on B2B strips High-efficiency DC-DC switching regulators 125 MHz reference clock signal Single-ended custom oscillator (option) eFUSE bit-stream encryption (LX100 or larger) 1 user LED Evenly-spread supply pins for good signal integrity Specifications Xilinx Spartan-6 LX FPGA (See model overview below) 10/100/1000 GBit Ethernet transceiver (physical layer) Marvell Semiconductor 88E1111 128 MBit (16 MByte) serial Flash memory with dual/quad SPI interface 48-bit node address chip Maxim Integrated Products DS2502-E48 (contains valid MAC adress) 2 x fine-pitch (0.5 mm) 100-pin high-speed (up to 10.0 GHz / 20 Gbps) hermaphroditic strips LSHM-150-04.0-L-DV-A-S-K-TR Up to 52 differential FPGA input/output pins available on B2B strips Up to 109 single-ended (+ 1 dual-purpose) FPGA input/output pins available on B2B strips Ethernet (PHY), JTAG and SPI pins available on B2B strips 4.0 A high-efficiency DC-DC switching regulator for power rail 1.2 V 1.5 A high-efficiency DC-DC switching regulator for power rail 1.5 V 2 x 800 mA DC-DC linear regulator for power rails 2.5 V and VCCAUX Processor supervisory circuits with power-fail and watchdog Texas Instruments TPS3705-33 125 MHz clock signal (system + user) Footprint for custom single-ended oscillator (option) Power supply voltage: 3.3 V Dimensions: 50 mm × 40 mm (20 cm²) Stacking hight: 8 mm Maximum height on carrier board surface: 12 mm (standard connectors) Weight: 17.2 ± 0.1 g Other assembly options for cost or performance optimization plus high volume prices available on request. Recommended Hardware GigaBee XC6SLX carrier board with external power supply JTAG Programming Cable Recommended Software Trenz Electronic GigaBee XC6SLX45: Xilinx ISE WebPACK (free license) To use Trenz Electronic reference designs, you need one of the following Xilinx software licenses: - Xilinx WebPACK + EDK (Embedded Development Kit) stand-alone (TE0630 LX45 and LX75 only) - Xilinx ISE Design Suite - Embedded Edition - Xilinx ISE Design Suite - System Edition All Xilinx ISE versions

Whatsapp